<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
  <channel>
    <title>小金虫 - 金相图谱</title>
    <link>http://www.xiaojinchong.com/forum-42-1.html</link>
    <description>Latest 20 threads of 金相图谱</description>
    <copyright>Copyright(C) 小金虫</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Mon, 25 May 2026 00:16:43 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>http://www.xiaojinchong.com/static/image/common/logo_88_31.gif</url>
      <title>小金虫</title>
      <link>http://www.xiaojinchong.com/</link>
    </image>
    <item>
      <title>钛及钛合金【TA3工业纯钛】-1</title>
      <link>http://www.xiaojinchong.com/thread-1760-1-1.html</link>
      <description><![CDATA[图1

图2

图3

材料名称：TA3（工业纯钛）
浸 蚀 剂：氢氟酸、硝酸、水的体积比为2∶1∶17
处理情况：锻棒经700℃×1h后空冷退火
组织说明：三图所示基体组织为等轴α相，在某些晶粒内出现孪晶。图1所示为明场照明，图2所示为图1同一视场的暗场照明，图3所 ...]]></description>
      <category>金相图谱</category>
      <author>Test.Wang</author>
      <pubDate>Mon, 25 Jun 2018 01:49:56 +0000</pubDate>
    </item>
    <item>
      <title>变形铝合金【2A80耐热锻铝合金】-5</title>
      <link>http://www.xiaojinchong.com/thread-1759-1-1.html</link>
      <description><![CDATA[材料名称： 2A80耐热锻铝合金
浸 蚀 剂：15% NaOH水溶液室温浸蚀，25% NOH[sub]3[/sub]水溶液中和去膜
处理情况：热挤压
组织说明：φ120mm棒材截面经15% NaOH水溶液室温浸蚀，25% NOH[sub]3[/sub]水溶液中和去膜后显现出龟裂。

============================ ...]]></description>
      <category>金相图谱</category>
      <author>Test.Wang</author>
      <pubDate>Sat, 23 Jun 2018 05:00:28 +0000</pubDate>
    </item>
    <item>
      <title>变形铝合金【2A80耐热锻铝合金】-4</title>
      <link>http://www.xiaojinchong.com/thread-1758-1-1.html</link>
      <description><![CDATA[图1

图2

材料名称：2A80耐热锻铝合金
浸 蚀 剂：图2混合酸水溶液
处理情况：锻造
组织说明：图1为锻件折叠缺陷宏观图。
      图2所示为折叠缺陷金相组织。由于锻造工艺不当，使锻造时金属流动过程中引起折皱裂纹，其表面裂纹较宽而尾部细、尖锐且不规则， ...]]></description>
      <category>金相图谱</category>
      <author>Test.Wang</author>
      <pubDate>Sat, 23 Jun 2018 04:58:58 +0000</pubDate>
    </item>
    <item>
      <title>变形铝合金【2A80耐热锻铝合金】-3</title>
      <link>http://www.xiaojinchong.com/thread-1757-1-1.html</link>
      <description><![CDATA[图1

图2

材料名称：2A80耐热锻铝合金
浸 蚀 剂：混合酸水溶液
处理情况：固溶后人工时效
组织说明：如图1所示，经555℃固溶水冷，175℃×8h空冷时效，化合物减少，复熔球普遍存在，Al[sub]9[/sub]FeNi相聚集长大，力学性能显著下降。
      图2所示为图1中 ...]]></description>
      <category>金相图谱</category>
      <author>Test.Wang</author>
      <pubDate>Sat, 23 Jun 2018 04:56:55 +0000</pubDate>
    </item>
    <item>
      <title>变形铝合金【2A80耐热锻铝合金】-2</title>
      <link>http://www.xiaojinchong.com/thread-1756-1-1.html</link>
      <description><![CDATA[图1

图2

图3

图4

材料名称：2A80耐热锻铝合金
浸 蚀 剂：混合酸水溶液
处理情况：固溶后人工时效
组织说明：如图1所示，经530℃固溶水冷，175℃×8h空冷时效，S（Al[sub]2[/sub]CuMg）相完全固溶于α固溶体中，晶界清晰，Al[sub]9[/sub]FeNi有集聚倾向 ...]]></description>
      <category>金相图谱</category>
      <author>Test.Wang</author>
      <pubDate>Sat, 23 Jun 2018 04:54:53 +0000</pubDate>
    </item>
    <item>
      <title>变形铝合金【2A80耐热锻铝合金】-1</title>
      <link>http://www.xiaojinchong.com/thread-1755-1-1.html</link>
      <description><![CDATA[图1

图2

材料名称：2A80耐热锻铝合金
浸 蚀 剂：混合酸水溶液
处理情况：固溶后人工时效
组织说明：如图1所示，经520℃固溶水冷，175℃×8h空冷时效，在α基体上分布着Al[sub]9[/sub]FeNi、AlCuNi等相和少量Mg[sub]2[/sub]Si相。
      图2所示为图1中组织 ...]]></description>
      <category>金相图谱</category>
      <author>Test.Wang</author>
      <pubDate>Sat, 23 Jun 2018 04:50:38 +0000</pubDate>
    </item>
    <item>
      <title>变形铝合金【2A70耐热锻铝合金】-2</title>
      <link>http://www.xiaojinchong.com/thread-1754-1-1.html</link>
      <description><![CDATA[材料名称：2A70耐热锻铝合金
浸 蚀 剂：15% NaOH水溶液室温浸蚀，25% NOH[sub]3[/sub]水溶液中和去膜
处理情况：热挤压
组织说明：经15% NaOH水溶液室温浸蚀，25% NOH[sub]3[/sub]水溶液中和去膜后，外表层有黑线状弧形裂纹（成层）的挤压缺陷。

============ ...]]></description>
      <category>金相图谱</category>
      <author>Test.Wang</author>
      <pubDate>Sat, 23 Jun 2018 04:45:57 +0000</pubDate>
    </item>
    <item>
      <title>变形铝合金【2A70耐热锻铝合金】-1</title>
      <link>http://www.xiaojinchong.com/thread-1753-1-1.html</link>
      <description><![CDATA[图1

图2

图3

材料名称：2A70耐热锻铝合金
浸 蚀 剂：混合酸水溶液
处理情况： 图1、图2为热挤压；图3为固溶后人工时效
组织说明：图1所示为φ80mm热轧棒材中心部位的显微组织，在α固溶体上有大量分解析出的S(Al[sub]2[/sub]CuMg)和Mg[sub]2[/sub]Si相细 ...]]></description>
      <category>金相图谱</category>
      <author>Test.Wang</author>
      <pubDate>Sat, 23 Jun 2018 04:44:15 +0000</pubDate>
    </item>
    <item>
      <title>变形铝合金【2A14锻铝合金】-7</title>
      <link>http://www.xiaojinchong.com/thread-1752-1-1.html</link>
      <description><![CDATA[图1

图2

图3

图4

图5

图6

图7

图8

图9

材料名称：2A14锻铝合金
浸 蚀 剂：未浸蚀
处理情况：自由锻件，车削加工后经170℃±10℃除应力退火热处理
组织说明：下端框材料为φ1300mm×75mm自由锻件，车削加工成图1所示的部件，经除应力退 ...]]></description>
      <category>金相图谱</category>
      <author>Test.Wang</author>
      <pubDate>Sat, 23 Jun 2018 04:39:15 +0000</pubDate>
    </item>
    <item>
      <title>变形铝合金【2A14锻铝合金】-6</title>
      <link>http://www.xiaojinchong.com/thread-1751-1-1.html</link>
      <description><![CDATA[图1

图2

图3

图4

材料名称：2A14锻铝合金
浸 蚀 剂：混合酸水溶液
处理情况：固溶后人工时效
组织说明：如图1、图2所示，模锻件经15% NaOH水溶液浸蚀后，表面出现两种形态裂纹，其中图1中有大量的细小枝杈状裂纹和长条状裂纹同时出现，图2中只出现一条 ...]]></description>
      <category>金相图谱</category>
      <author>Test.Wang</author>
      <pubDate>Sat, 23 Jun 2018 04:31:58 +0000</pubDate>
    </item>
    <item>
      <title>变形铝合金【2A14锻铝合金】-5</title>
      <link>http://www.xiaojinchong.com/thread-1750-1-1.html</link>
      <description><![CDATA[图1

图2

材料名称：2A14锻铝合金
浸 蚀 剂：15% NaOH水溶液室温浸蚀，25% NOH[sub]3[/sub]水溶液中和去膜
处理情况：图1为固溶处理；图2为锻造
组织说明：图1所示为经固溶处理后用15% NaOH水溶液室温浸蚀，25% NOH[sub]3[/sub]水溶液中和去膜后显现的月牙形 ...]]></description>
      <category>金相图谱</category>
      <author>Test.Wang</author>
      <pubDate>Sat, 23 Jun 2018 04:28:27 +0000</pubDate>
    </item>
    <item>
      <title>变形铝合金【2A14锻铝合金】-4</title>
      <link>http://www.xiaojinchong.com/thread-1749-1-1.html</link>
      <description><![CDATA[图1

图2

图3

材料名称：2A14锻铝合金
浸 蚀 剂：图1、图3为15% NaOH水溶液室温浸蚀，25% NOH[sub]3[/sub]水溶液中和去膜
处理情况：图1为固溶处理；图2、图3为锻造
组织说明：图1所示为500℃固溶处理后经15% NaOH 水溶液室温浸蚀，25% NOH[sub]3[/sub]水 ...]]></description>
      <category>金相图谱</category>
      <author>Test.Wang</author>
      <pubDate>Sat, 23 Jun 2018 04:25:18 +0000</pubDate>
    </item>
    <item>
      <title>变形铝合金【2A14锻铝合金】-3</title>
      <link>http://www.xiaojinchong.com/thread-1748-1-1.html</link>
      <description><![CDATA[图1

图2

图3

图4

材料名称：2A14锻铝合金
浸 蚀 剂：混合酸水溶液
处理情况：按图序分别为495℃、510℃、515℃、580℃固溶后水冷
组织说明：2A14属于Al-Mg-Si-Cu系高强度锻铝合金，正常固溶温度为500℃±5℃，显微组织中S（Al[sub]2[/sub]CuMg）基本消 ...]]></description>
      <category>金相图谱</category>
      <author>Test.Wang</author>
      <pubDate>Sat, 23 Jun 2018 04:21:43 +0000</pubDate>
    </item>
    <item>
      <title>变形铝合金【2A14锻铝合金】-2</title>
      <link>http://www.xiaojinchong.com/thread-1747-1-1.html</link>
      <description><![CDATA[图1

图2

图3

材料名称：2A14锻铝合金
浸 蚀 剂：混合酸水溶液
处理情况：固溶后人工时效
组织说明：如图1所示，φ180mm棒材经503℃水冷固溶，150℃×10h空冷时效，浸蚀时间短，晶界未显现，沿拉伸方向排列的灰色块状相为Al[sub]6[/sub]（MnFeSi）和ω（Al ...]]></description>
      <category>金相图谱</category>
      <author>Test.Wang</author>
      <pubDate>Sat, 23 Jun 2018 04:17:45 +0000</pubDate>
    </item>
    <item>
      <title>变形铝合金【2A14锻铝合金】-1</title>
      <link>http://www.xiaojinchong.com/thread-1746-1-1.html</link>
      <description><![CDATA[图1

图2

图3

材料名称：2A14锻铝合金
浸 蚀 剂：混合酸水溶液
处理情况：固溶后人工时效
组织说明：如图1所示，φ180mm棒材经500℃水冷固溶处理，150℃×10h空冷时效，合金已再结晶，其晶粒沿压挤方向伸长，化合物沿压挤方向成行排列，在组织中还可见到亚 ...]]></description>
      <category>金相图谱</category>
      <author>Test.Wang</author>
      <pubDate>Sat, 23 Jun 2018 03:08:50 +0000</pubDate>
    </item>
    <item>
      <title>变形铝合金【2A50锻铝合金】-4</title>
      <link>http://www.xiaojinchong.com/thread-1745-1-1.html</link>
      <description><![CDATA[图1

图2

图3

图4

材料名称：2A50锻铝合金
浸 蚀 剂：混合酸水溶液
处理情况：图1和图2为530℃固溶后水冷；图3为545℃固溶后水冷；图4为640℃固溶后水冷
组织说明：属于Al-Mg-Si-Cu系的2A50锻铝合金，正常固溶温度为520℃±5℃，显微组织中有少量剩余的 ...]]></description>
      <category>金相图谱</category>
      <author>Test.Wang</author>
      <pubDate>Sat, 23 Jun 2018 03:04:48 +0000</pubDate>
    </item>
    <item>
      <title>变形铝合金【2A50锻铝合金】-2</title>
      <link>http://www.xiaojinchong.com/thread-1743-1-1.html</link>
      <description><![CDATA[图1

图2

图3

材料名称：2A50锻铝合金
浸 蚀 剂：混合酸水溶液
处理情况：固溶后人工时效
组织说明：如图1所示，φ100mm棒材经510℃×40min水冷固溶处理，160℃×6h空冷时效强化，纵向取样，晶粒沿挤压方向伸长呈纤维状，失去了铸态特征，破碎不溶化合物沿 ...]]></description>
      <category>金相图谱</category>
      <author>Test.Wang</author>
      <pubDate>Sat, 23 Jun 2018 02:58:32 +0000</pubDate>
    </item>
    <item>
      <title>变形铝合金【2A50锻铝合金】-1</title>
      <link>http://www.xiaojinchong.com/thread-1742-1-1.html</link>
      <description><![CDATA[图1

图2

图3

材料名称：2A50锻铝合金
浸 蚀 剂：混合酸水溶液
处理情况：退火
组织说明：图1所示为φ200mm棒材退火状态下的外缘组织，由于变形量大，故组织较细，在α固溶体基体上沿拉伸方向呈断续状分布着Mg[sub]2[/sub]Si相、ω（Al[sub]4[/sub]Mg[sub] ...]]></description>
      <category>金相图谱</category>
      <author>Test.Wang</author>
      <pubDate>Sat, 23 Jun 2018 02:54:29 +0000</pubDate>
    </item>
    <item>
      <title>变形铝合金【6A02锻铝合金】-4</title>
      <link>http://www.xiaojinchong.com/thread-1741-1-1.html</link>
      <description><![CDATA[图1

图2

图3

图4

材料名称：6A02锻铝合金
浸 蚀 剂：混合酸水溶液
处理情况：图1为590℃固溶后水冷；图2为610℃固溶后水冷；图3和图4为640℃固溶后水冷
组织说明：属于Al-Si-Mg系的6A02锻铝合金，热处理温度通常为535℃±10℃，显微组织中有少量剩余的 ...]]></description>
      <category>金相图谱</category>
      <author>Test.Wang</author>
      <pubDate>Sat, 23 Jun 2018 02:49:06 +0000</pubDate>
    </item>
    <item>
      <title>变形铝合金【6A02锻铝合金】-3</title>
      <link>http://www.xiaojinchong.com/thread-1740-1-1.html</link>
      <description><![CDATA[图1

图2

材料名称：6A02锻铝合金
浸 蚀 剂：混合酸水溶液
处理情况：固溶后自然时效
组织说明：如图1所示，固溶处理时跑温至600℃水冷，组织中出现大量的（α+Mg[sub]2[/sub]Si）二元共晶复熔球，使力学性能明显降低（R[sub]m[/sub]=180.2~201.3MPa，A=13%~1 ...]]></description>
      <category>金相图谱</category>
      <author>Test.Wang</author>
      <pubDate>Sat, 23 Jun 2018 02:45:20 +0000</pubDate>
    </item>
  </channel>
</rss>